Ultguide_webbanner_218x126

Learn How SIMPLE
Digital Patterns Really Are!

Sign Up to Receive
The Ultimate Guide to Digital Sewing Patterns eBook + a FREE Skirt Pattern!

How_to_sew_a_neck_facing_main_image_large

Neck facings are one of the easiest (and neatest) ways to finish a neckline edge. But what if a zipper is involved? Things can get messy and complicated. Read on to see a quick and easy way of installing a neckline facing with invisible zipper…

Install Neck Facing 1


The first thing to do is sew in your invisible zipper (click here to see how) and then sew your shoulder seams. It is best to first serge- or zig zag-finish your shoulder edges and then press your shoulder seam allowances open to reduce bulk.

Install Neck Facing 2


Neck is to prepare your neckline facing. Fuse interfacing to the wrong side and then sew your facing’s shoulder seams and press open. You do not need to serge- or zig zag-finish the shoulder seam edges since the interfacing will prevent fraying and the seam will not be visible even from the inside of your garment. But what you can do is serge- or zig zag-finish the outer curved edge to create an aesthetic finish.

Install Neck Facing 3


Push back out the zipper seam allowance so it is flat and press back the excess facing allowance. In this case, this is the center back edge.

NEW 4


Then take the center back edge (with zipper sewn) and flip it once the cover the facing’s pressed edge and pin in place. Note, the invisible zipper stitching will now be exactly at the center back edge. Start sewing the neck facing to the neckline edge directly above the zipper stop where the black arrow is.

NEW 5


Once stitched, see black arrow, trim down and clip into the neckline seam allowance.

Install Neck Facing 6


Flip the neck facing away from the garment, with the trimmed seam allowance towards the facing, and under-stitch to the facing about 1/8" away from the seam. Note, you will not be able to get right into the corners where the zipper is, so just under-stitch as far as you can go.

Install Neck Facing 7


Use a point turned to poke at the facing corners to make them nice and then pin the pressed facing edges to the zipper and hand stitch in place.

Finished


This is the last step to complete this pattern which is a BurdaStyle + Sprout pattern! That means that you can get the pattern lines directly printed on the fabric. Design your own here, and it is our Girl’s Pleated A-Line Dress pattern.

2 Comments

  • Missing

    Feb 20, 2018, 07.26 PMby sew4210aol

    Even better — before sewing the facing to the garment at the neck edge, sew the facing to the edge where the zipper is sewn. You may have to make the facing stick out from the zipper edge by about 1/4" because of the fold as shown in these photos. Then fold back and sew the neck edge and understitch. You then don’t need to hand stitch the facing edges to the zipper!

  • Simba_nov_06_large

    Feb 18, 2018, 11.53 AMby nrobson

    brilliant, love the print! great tutorial too =)

    • This is a question
  1. Sign in to add a post

Departments

  • Editors' Pick
  • Pattern Collections
  • BurdaStyle Academy
  • Burda Challenge
  • Backstage Report
  • Fashion & Trends
  • DIY to Try
  • Tips & Techniques
  • Member Highlights
  • Sewing Projects
  • Outta Town
  • Contests & Competitions
  • Archive
  • Guest Columns
  • Videos
  • Meg's Magazine Mash Up
  • As Seen In
  • Podcast
  • Holiday