Pattern06_large

To make the facings, I made a copy of the front jacket piece, and then marked a line 3" in along the side, with a gradual curve up to the shoulder. I did the same for the back, starting from the same shoulder point that I ended at on the front, and then making a gradual "u" shape along the back of the neck. For the pockets, I cut rectangles that were 4.5" tall, and 4" wide. For the right length collar, you can mark 3" in from the edge of your lapels, and then measure point to point along the neck line. Mine came out to be around 14.5", so I started with a strip of fabric that was 15.5" long across the top, and about 14.5" long across the bottom since the edges are slanted.

0 Comments

    • This is a question
  1. Sign in to add a post
Burdastyle

http://burdastyle.com//techniques/design-draft-your-own-jackets-fiskars-unzipped/technique_steps/3