Step_tweleve_large

Stitch the pleat in place on your sleeve hem according to the directional arrows indicated on pattern. Cut the sleeve slit opening (refer to image one). Prepare another piece of bias and sew to slit opening (refer to image two). On the cuff, press up the seam allowance on the un interfaced side and fold the cuff along center foldline right sides together and stitch along seamline (refer to image three). Repeat for other sides of cuffs. Flip cuff to right side and press. Stitch the sleeve seams, right sides together. Pin cuff to the lower edge of sleeve starting at each slit opening edge. Make sure to align the seam line (not the seam allowance edge) with the edge of the slit opening bias (refer to image three). Stitch the cuff to the sleeve along seamline.

0 Comments

    • This is a question
  1. Sign in to add a post
Burdastyle

http://burdastyle.com//techniques/cut-out-shoulder-diy/technique_steps/13