1 / 2
YOU NEED AS WELL: crepe-georgette for trimming; open-ended zipper; elastic; hook-and eye tape.
IF THE PATTERNS HAVE DOUBLE CONTOUR, THE SEAM ALLOWANCE IS PROVIDED,
IF THE PATTERNS HAVE SINGLE CONTOUR, THE SEAM ALLOWANCE IS NOT PROVIDED.
ADVICE: to prevent seam from stiffing, sew pieces with special (zigzag) stitch. To prevent hem from stiffing overcast it with overlocker and then stitch using double needle. Do the same for all edges must stay elastic.
1. Centre back – 1 folded piece
2. Side back – 2 pieces
3. Side front – 2 pieces
4. Centre front – 1 folded piece
5. Front inset – 2 pieces
6. Left ruffle – 2 pieces
7. Right ruffle – 1 folded piece
8. Strap – 2 pieces
1. Stitch the front/back curved edges. Stitch the side right seam.
2. Stitch the inset pieces together. Trim the seam allowances on the corners of the side front diagonally and stitch the inset to the front.
3. Neaten the ruffle long edges and the short edges of the left ruffle. Press the seam allowances to the wrong side and topstitch. Gather the top edges and stitch them to the leg openings between the marks.
4. Press the side left seam allowances to the wrong side of the body. Sew the zipper in. Stitch the elastic with zigzag stitch to the leg openings, stretching it more on the back.
7. Sew the hooks and eyes above the zipper.
8. Make up and topstitch the shoulder straps. Stitch them to the front inset; then try the body on and check the strap lengths. Sew the straps to the back curved seams.