Burda Style For people who sew

Belt
Fold the belt along the FOLD LINE, belt fabric inside out. Pin and stitch edges on top of each other according to drawing. Trim allowances, cut corners diagonally. Turn belt. Baste edges, press and stitch narrowly. Baste
open belt end between the cross lines of the right front skirt panel (1a). At the other belt end, approximately 3/4” (1.5 cm) next to the edge; incorporate a button hole. (a)

Front dividing seam
Position front skirt panels facing right to the right, baste dividing seam (seam 1) and stitch, doing so enclose the belt between the panels. Trim allowances, neaten altogether and press inwards into the left front panel. (b)

Front skirt panel / pleats
Fold the right front skirt panel in such a way as to make the lines indicated by an arrow in the drawing meet, the right fabrics sides inside. Baste lines from the top to bottom one on top of the other. ©

• 1
• 2
• 3
• 4
• 5
• 6
• 7
• 8
• 9
• 10

• Add to favorites
• Print page
• Get all Instructions (PDF, 2.5 MB)