Burda Style For people who sew

Hip Yoke Pockets
Place pocket right sides facing onto the front pant piece. Pin pocket edges Onto each other (seam number 1) and stitch. (a) Fold over and pin pocket to the inside. Iron edge and stitch, allowing 0.7cm (1/4 inch) (b).

Pin the front pant piece to the hip yoke piece so that the opening of the pocket meets with the line marked BASE, right sides of the pocket and the hip yoke are facing. Adjust the pocket opening, pin as depicted. ©

Place the pocket piece onto the hip yoke piece; do not take in the front pant piece. Stitch. De-baste seam allowances held together. Pin the side, upper and front edges of the hip yoke pieces onto the front pant piece. Pay attention: At the right hip yoke piece, cut the seam allowance of the front edge at the front middle (arrow). (d)

Side Seams/ Inner Leg Seams
Place front pant pieces right sides facing onto the back pant pieces. Stitch side seams (seam number 2), pin inner leg seams (seam number 3). Stitch seams. Trim seam allowances and finish. (e)

• 1
• 2
• 3
• 4
• 5
• 6
• 7
• 8
• 9
• 10
• 11

• Add to favorites
• Print page
• Get all Instructions (PDF, 3.1 MB)