Added Feb 10, 2013
Hamilton, New Je...
This very large tote was straight forward to make. The finished size of about 20″ × 12″ × 12″ yields a sturdy piece of luggage that can hold a week end’s worth of clothes.
Check my blog for more pictures www.fashiondoubletake.blogspot.com
Instructions: I used a serpentine stitch that was built into my Husqvarna Viking SE to quilt the fabric-batting-backing for the two side panels and the one large piece that becomes the top, long sides and bottom.
Next, a patch pocket is applied to the long side, and a pleated pocket is attached to the short side. I think the finished bag would have been just as nice without these pockets.
The instructions specify making a circle of jute webbing to be stitched to the bottom and the long sides. I only had enough handle to make a loop for each side, and the bag is plenty strong, anyway.
Next, attach the 20" zipper to the short ends of the large rectangle. The pattern does not require a separating zipper, but I recommend one for ease of sewing.
There are small fabric tabs that the designer asks to sew over the ends of the zipper, but next time I expect that I will omit this step, since the tabs stick up oddly.
The last step is to sew the short sides onto the large rectangle. I added boning to this seam. I also pressed, then top stitched the large piece, creating the illusion of a separately sewn top and bottom. This created a professional finish, as well as supporting the bag so it can stand.
bottom weight woven with stretch for exterior & lining, zipper, 1" webbing, pellon fusible fleece
Sewing & Techniques
Make your own knitwear designs with our new knit top/dress and legging slopers
Fashion & Trends
It's the first day of fall! Take a look back at summer's most popular dresses.
with our top 5 reasons to register.
Flirty dresses, a cropped cami, and glam trousers for modern flappers.
Still time to enter! Deadline extended until September 29th
You must allow our "request for permission" request to login to Burdastyle with Facebook.