Jonny

Added Jan 20, 2007

By burdastyle

New York, New Yo...

Letterbicon_thumb

Views

65301

Step2_large

ADJUST PATTERN SIZES
Select your size according to the Burda-dimension table: dresses, blouses, jackets and coats according to the bust size, trousers and skirts according to the hip width. Change the pattern to fit your measurements if they deviate from the Burda-size chart. Cut out the pattern according to your size.
Refer to our ‘Adjust patterns for mixed sizes’ technique

LENGTHENING OR SHORTENING THE PATTERN PIECES
Our pattern is calculated for a height of 5’ 6” (168 cm). If you are taller or shorter, you can adjust the pattern pieces along the lines marked “lengthen or shorten here”. This way the proper fit is maintained. Always adjust all pattern pieces along the same line to the same degree.

How to lengthen and shorten pattern pieces:
Cut the pattern pieces along the marked lines
To lengthen, slide the two halves of the pattern piece as far apart as necessary.
To shorten, overlap the two halves of the pattern piece as far as necessary. Blend the side edges.

Sizes 34 to 44:
In piece 1 the buttonholes are marked for a size 32.For the other sizes, mark the top buttonhole at the same distance from the neckline as in a size 32. The lowest buttonhole is the same for all sizes. Mark the
remaining four buttonholes, evenly spaced, between the upper and lower buttonhole.

0 Comments on Step 3

    • This is a question
  1. Sign in to add a post

Rating

19 votes

Rate this project

Difficulty

Intermediate

Patterns for this Project

Finished Projects

  • 285695_509873545690265_2098052182_n_thumb
  • Jonny_dress_fabric_thumb
  • P8200027_edited_thumb
Burdastyle

http://burdastyle.com//projects/jonny/instructions/3