jersey dress with pleats

Added Jun 10, 2009

by lauriana

Den Haag, Nether...

9042c0bf5223511d5cc13e721fdeef21914bb56c_thumb

Views

6472

A273dce4b0982f8e07774fb81e2232244219b987_original_large

Now you are going to draft the skirt. Start at the center front and back lines and extend these to length you want for your skirt plus hem allowance (usually measured from the waist, the finished length of the skirt of my dress is 52 cm). Then draw the side of the skirt. Use the beginning of the curve from waist to hip in the pattern as a starting point (this means your skirt will already be wider then the t-shirt pattern at its hemline, because t-shirt patterns are usually quite straight at the hip). Draw the hemline in a curve (the distance of waist to hem should be about 1 cm less at the sideseams, because they will stretch more in sewing and wearing)

0 Comments on Step 2

    • This is a question
  1. Sign in to add a post

Rating

4 votes

Rate this project

Difficulty

Novice

This project is based on

Burdastyle

http://burdastyle.com//projects/jersey-dress-with-pleats/instructions/2