Burda Style For people who sew

ADJUST PATTERN SIZES
Select your size according to the Burda Size Chart: Dresses, blouses, jackets and coats according to the bust size,
trousers and skirts according to the hip width. Change the patterns about those inches (cm) if necessary, to fit your
measurements if they deviate from the Burda Size Chart. Cut out the pattern according to your size. (a)
Refer to our ‘Adjust patterns for mixed sizes’ technique

= Upper waist band edge 3/5” (1.5 cm) below the waist. For sizes 10 to 22 draw the stitch line for the zipper on
piece 1. The length between the zipper and stitch line should remain the same regardless of size. (see size 8)

LENGTHENING OR SHORTENING THE PATTERN PIECES
Our pattern is calculated for a height of 5’ 6” (168 cm). If you are taller or shorter, you may adjust the pattern to fit
your size. Choose your size at the lines marked “lengthen or shorten here”. Thus the proper fit is preserved.
Make sure that you adjust all pieces of one pattern by the same amount at the same lines. (b)

How to lengthen and shorten pattern pieces:
Cut the pattern pieces along the marked lines.
To lengthen, slide the two halves of the pattern piece as far apart as necessary.
To shorten, overlap the two halves of the pattern piece as far as necessary. Even out the side edges. ©

• 1
• 2
• 3
• 4
• 5
• 6
• 7
• 8
• 9

• Add to favorites
• Print page
• Get all Instructions (PDF, 2.4 MB)