Burda Style For people who sew

AB
Collar with stand
Position the collar pieces on top of each other, right sides facing. Pin the edges together, and stitch. Trim the allowances, and cut the corners diagonally. Fold the collar right-side out. Pin the edges, press, stitch narrowly: for B also stitch ¼” (0.7 cm) wide. Apply a BUTTONHOLE into the collar corners. For AB, pin the open edges on top of each other (a).

Press the allowances of the stand edge to the inside (this stand is not interfaced), and pin it onto the interfaced side of the collar. Pin the interfaced stand to the other side of the collar. Pin the stand pieces together (seam 3), and stitch, enclosing the collar. Trim allowances, cut the corners diagonally. Fold the stand right-side out. Pin the edges, press (b).

Pin the interfaced stand onto the neckline (seam 4), stitch. Trim allowances, snip and press inside the stand. Pin the non-interfaced stand onto the seam line. Onto the right side, topstitch all stand edges narrowly, thereby stitching the inner half of the seam line. Apply a BUTTONHOLE into the collar stand ©.

• 1
• 2
• 3
• 4
• 5
• 6
• 7
• 8
• 9
• 10
• 11

• Add to favorites
• Print page
• Get all Instructions (PDF, 2.4 MB)