Hikaru

Added Nov 20, 2007

By burdastyle

New York, New Yo...

Letterbicon_thumb

Views

40144

Step3_large

CUTTING OUT
FOLD (– – – –) means: Cut on the fold, the fold being the center of the pattern piece, but never a cut edge or seam. The piece should be cut double, with the fold line forming the center line. Pattern pieces that are outlined with a broken line in the cutting diagrams are to be placed face down on the fabric. The cutting diagrams on the pattern sheet show how the pattern pieces should be placed on the fabric.

The cutting diagrams show the placement of the pattern on the fabric.

For a single layer of fabric, the pattern pieces are pinned to the right side. For double layers of fabric, the right sides are facing and the pattern pieces are pinned to the wrong side. The pattern pieces that are shown extending over the fold of the fabric in the cutting diagram should be cut last from a single layer of fabric.

A
Cut out the following pattern pieces in the required size from the pattern sheet:
For the JACKET view A pieces 1 to 16 and 22 to 28, Sizes 4 to 12 (36 to 46)

For view A, mark the x for the button placement on piece 1 the same distance from the panel seam as for size 2 (34). Mark the top buttonhole in the same distance from upper edge as for size 2 (34), the buttonholes are placed the same way for all sizes. Mark the other buttonholes evenly in between.

0 Comments on Step 4

    • This is a question
  1. Sign in to add a post

Rating

9 votes

Rate this project

Difficulty

Intermediate

Patterns for this Project

Finished Projects

  • Pics_002_thumb
  • Ml11_thumb
  • Photo_thumb
Burdastyle

http://burdastyle.com//projects/hikaru/instructions/4