Burda Style For people who sew

PIPING POCKETS WITH FLAPS
The front pocket end is marked for size 34 (EU 44). For sizes 36 to 50 (EU 46 to 60), mark the end of the pocket from the dart of the individual size.

Pin the piping strips along both edges of the cutting line on the front piece, stitch _“ (0.7 cm) wide. Secure seam ends (a).

Cut in the front piece: at the pocket ends, cut at an angle that creates small triangles. Do not cut in the piping (b). Press the piping over the seam line.

Turn the piping to the inside. Pin along the right side so that the piping pair is equally wide and fills out the cutting line ©. Fold the little triangles inside and stitch on the piping (d).

Pin the lining pocket pouch (piece 14) onto the left front piece so that the upper edge is positioned above the seam line of the bottom piping. On the right side, stitch along the seam line of the bottom piping, enclosing the pocket pouch. Press the pocket pouch downwards (e).

• 1
• 2
• 3
• 4
• 5
• 6
• 7
• 8
• 9
• 10
• 11
• 12
• 13
• 14

• Add to favorites
• Print page
• Get all Instructions (PDF, 3.2 MB)