Burda Style For people who sew

Lay side parts from seam 6 respectively 7 onto the center piece. Stitch seams. (a)

Enclose edges: Fold and press the long edges along the bias tapes and the end of the bias tapes inwards, about 3/10” (0.7 cm). Then press the tapes onto half of the width. Enclose the short tapes to the side pocket edges. Move pocket edge between the tape edges, until it touches the break line. The tape ends are facing down. Pin tape edges together, stitch. (b)

Open zipper and pin on the upper edges of the center piece, the little teeth touch the marked zipper line. Turn open tape ends, the closed zipper end overlaps. Stitch zipper tapes. Enclose upper edges of the center piece with the bias tapes, the zipper tapes included. From the end of the center piece continue enclosing the zipper tapes only. ©

Fold placket (piece 6) along, stitch long edges together. Turn placket, press. (d)
.
Fold half of placket, open edges inside. Lay placket around the overlapping zipper tape and stitch. (e)

• 1
• 2
• 3
• 4
• 5
• 6

• Add to favorites
• Print page
• Get all Instructions (PDF, 2.3 MB)