Burda Style For people who sew

ADJUST PATTERN SIZES
Select your size according to the Burda-dimension table: dresses, blouses, jackets and coats according to the bust size, trousers and skirts according to the hip width. Change the pattern to fit your measurements if they deviate from the Burda-size chart. Cut out the pattern pieces 1 to 13 for the men’s coat according to your size.
Refer to our ‘Adjust patterns for mixed sizes’ technique

Sizes 40 to 43 (EU 48 to 54): On the center front piece, mark the top button hole, and mark the button spot respectively in the same way as size 39 (EU 46). For all other sizes, place these two markings with the same space to the top edge and front edge as size 39 (EU 46). The markings for the last button and button hole at the bottom are the same for all sizes. Space out the other markings equally.

LENGTHENING OR SHORTENING THE PATTERN PIECES
Our pattern is calculated for a height of 5’ 6” (168 cm). If you are taller or shorter, you can adjust the pattern pieces along the lines marked “lengthen or shorten here”. This way the proper fit is maintained. Always adjust all pattern pieces along the same line to the same degree.

How to lengthen and shorten pattern pieces:
Cut the pattern pieces along the marked lines
To lengthen, slide the two halves of the pattern piece as far apart as necessary.
To shorten, overlap the two halves of the pattern piece as far as necessary. Blend the side edges.

• 1
• 2
• 3
• 4
• 5
• 6
• 7
• 8
• 9
• 10
• 11

• Add to favorites
• Print page
• Get all Instructions (PDF, 2.8 MB)