Yoshimi Hand Warmers (4943 Views)

view all steps

•  
  1
•  
  2
•  
  3
•  
  4
•  
  5
•  
  6
•  
  7
•  
  8
•  
  9

• 

  Step 1 of 9

  This pattern is used for only jersey fabric. Pattern includes seam allowance (0.3cm=~1/8inch). Use thread for stretchy fabric. All edges are to be left raw otherwise stated. If your jersey is not so stretchy, try printing pattern larger than 100% (eg. 103%) However, it would be best making sure of its tightness with a glove made by 100% before you have a real go, as this is very easy and less fabric consuming.

• 

  Step 2 of 9

  Press (Iron) once and open the hem of thumb part on 5mm inward before assembling.

• 

  Step 3 of 9

  Folding right side inside, stitch thumb part to make a tube.

• 

  Step 4 of 9

  Fold the edge of thumb part as pressed before and stitch. This is the most difficult step of all procedure.

• 

  Step 5 of 9

  Applause your stitched hem.

• 

  Step 6 of 9

  Assemble thumb tube and body part. Be sure of the correct direction and the assemble signs when assembling.

• 

  Step 7 of 9

  Press the ends of a glove before stitching lengthwise. Then stitch lengthwise.

• 

  Step 8 of 9

  Finish by zig zag stitching or other stitch for elastic fabric on both ends.

• 

  Step 9 of 9

  Done.