|
Azalea Recycled (6338 Views)
view all steps
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
Step 1 of 18
Print your pattern onto recycled paper and piece together. Pin pattern pieces to fabric and cut out. What you see in this photo is the underskirt, i did not have enough fabric to cut the front and back pieces on the fold so i cut out two pieces for the back and included a seam allowance for sewing them together into one piece.
-
Step 2 of 18
Make marking where required using chalk or a contrasting thread.
-
Step 3 of 18
-
Step 4 of 18
Cut out one of each front and back yoke pieces from interfacing and iron on.
-
Step 5 of 18
Mark and sew darts on underskirt. Press them downwards.
-
Step 6 of 18
PIn and sew side seams of underskirt, basting on right side from notch upwards.
-
Step 7 of 18
Sew the side seams for the topskirt and baste on the right side from the notch upwards. Sew a double baste stitch around the top and gather.
-
Step 8 of 18
Spacing the gathers evenly pin the top skirt to the underskirt, baste and sew.
-
Step 9 of 18
Take the front and back yokes without interfacing and sew together at the left side.
-
Step 10 of 18
Pin yoke to skirt, baste and sew.
-
Step 11 of 18
Sew the interfaced yokes to the otherside, clip the curves and turn.
Please excuse the low lit photographs, these were taken very late at night.
-
Step 12 of 18
Stitch the outer shoulders together, fold in the seams and blind stitch closed.
At this point sew in the zip.
-
Step 13 of 18
Sew the two belt pieces together and press the seam open.
-
Step 14 of 18
Fold the belt in half and press. Sew all around the open edges leaving a gap for turning. Clip the corners, turn, press and stitch opening closed.
-
Step 15 of 18
Fold, press and stitch the hems of the skirts and decorate the top skirt if you wish. I used a few of these crocheted doilies bought for a dollar each.
-
Step 16 of 18
-
Step 17 of 18
-
Step 18 of 18
|
COMMENTS (6)
Great tutorial!
I am curious if you can cut the doilies and if so, how should they be sewn to prevent fraying?
I wish to sew a jersey top and use only a triangle like a pizza slice out of the doilies...without overlapping it onto the fabric. Do you have any tips on sewing the raw edges?
I've not tried this but my first thought would be to use the overlocker with the blade, cutting and covering the raw edges at the same time.
Thank nikkishell! I'll give it a try with the overlocker. Since I got them for a dollar, it won't cost much even to test it first :)
I'd never have thought to use the printed fabric as the underlayer, but this is lovely! I agree, thanks for the inspiration!