Does anyone have any suggestions and tips when setting snaps? I’m always very hesitant prior to hammering the snaps in place afraid it will shift and/or the prongs will somehow get loose and not “snap” thru the fabric.. Someone suggested a “snapsetter” while another says it’s a waste of money. I wasted a tote after carefully following directions to only find my snap off cenetered and one of the prongs didn’t prong thru the fabric. Any tips out there? Thank you!
You must be registered to add a new post!
Generally, I think that Burda patterns are quite accurate compared to other big pattern…
In: I joined a church sewing group
Many people are wary of inviting people into their homes. Even my building has a "hobb…
In: Scale a pattern
In: what to do with lots fabric scraps?
I went through my scraps and cut off any pieces that were not useable. Anything that w…
Take a tape measure and hang it down over your center front and center back and see the…
Editor's Pick
A pattern from 1961 brought back to life!
Guest Columns
Marina Von Koenig finishes another couture garment
Editor's Picks
Alberta Ferretti Dress
Member Project of the Week
I wear it a lot these days…it is one of my favorite dresses.
Editor's Pick
Check out these great new patterns
Click here to go to blog post...
Dec 13, 2011, 10.57 PMby patti-r
burdastyle.com/discussions/someone-help-me/topics/any-tips-for-using-hammer-on-snap-fasteners—2
See if any of these tips help, sorry I am Snap Challenged tried most of the tools with same results as yours. Snaps worked when testing on scraps but not on actual garment. Only do mostly couture snaps.
Hoping others have more input.
Dec 14, 2011, 12.18 AMby jenss-1
I’ve had good success (so far) just using a hammer. However, and maybe this is the key, I use a small light hammer that is intended for finish nails.
Dec 14, 2011, 12.48 PMby sewingfan1
I am definitely snap challenged. I’ve never got the hammer on sort to work and can’t even work out WHY they won’t. I’ve reverted to sew on types :-(
Dec 20, 2011, 05.32 PMby Lucha Suarez
I reall like the snap setter, I have had great success with it, and I love snaps!!
2 Replies
Dec 20, 2011, 07.10 PMby sewingfan1
Which brand/who makes the snap setter you use? And which make of snaps do you use? I would really love to be able to use hammer on snaps if I could get them to work!!
Dec 21, 2011, 04.31 PMby Lucha Suarez
I buy my snap setter and snaps from snapsource.com, they are the best!!! The snaps and the company!!!!! the setter is a three piece set and it holds everything in place nicely while you hammer away! I highly reccomend them!!!!!!!!!!!
Dec 20, 2011, 08.08 PMby unahowe
Years ago I use to get all my snaps from Tandy leather Company. They sold snaps by the gross. I have had my snap setter for 48 years and don’t remember the brand. If you are making purses you should use the snaps from Tandy as they sell items for larger projects. Good Luck
1 Reply
Dec 21, 2011, 06.27 PMby sewingfan1
Thankyou both, I shall look them up on the internet and maybe give snaps another chance